Edit Menu Field Descriptions; System - DPS Telecom BVM 48 User Manual

12

Edit Menu Field Descriptions

12.1

System

From the Edit > System menu, you will edit global, T/Mon and control settings for the BVM.
Name
Location
Contact
"From" Email Address
SNMP GET String
SNMP SET String
User
Password
DCP Unit ID
Listen DCP
DCP LAN
DCP Serial
Initialize Configuration
Backup Configuration
Restore Configuration
Analog History
Fig. 11.1 - The Edit > System menu
Global System Settings
A name for this BVM. (Optional field)
The location of this particular BVM. (Optional field)
Telephone number for the person responsible for this BVM. (Optional)
A valid email address used by the BVM for sending email alarm notifications.
Community name for SNMP requests. (case-sensitive).
Community name for SNMP SET requests. (case-sensitive).
Used to change the username for logging into the unit.
Used to change the password for logging into the unit (case-sensitive).
DCP Responder Settings (For use with T/Mon NOC)
User-definable ID number for this unit (DCP Address).
Choose to listen DCP over LAN or serial. May also be disabled.
Enter the DCP port for this unit (UDP/TCP port).
Clickable link to configure serial port settings.
System Controls
Used to restore all factory default settings to the BVM. Do not initialize the non-volatile
RAM (NVRAM) unless you want to re-enter all of your configuration settings again.
Saves your current configuration to a .bin file
Clickable link that takes you to the Firmware Load screen, where you'll browse to the
config file you've saved on your PC
Use the buttons to clear or export your analog history. The Export function allows for
saving your analog data as a .csv file.
25