DPS Telecom BVM 48 User Manual page 26

22
5. At the Schedule screen, you'll select the exact days/times you want to receive SNMP notifications.
You can set 2 schedules per notification. For example, you may want to receive notifications at certain
times during the week, and at different hours on the weekend. Use the check boxes to select the days
of the week, and select the time from the drop down menus. Click Finish. To try a test notification, click
the Test button (See next step.)
6. If you chose to test the SNMP notification, you will see the popup below. Click OK to send a test
SNMP alarm notification. Confirm your settings by checking your alarm master to see if the SNMP trap
was received.
NOTE: This test only means that your notification settings are correct, but you still need to assign the
notification to an alarm point. See Step 7 in "How to Send Email Notifications" for more detail.
Fig. 10.12
Fig. 10.13