DPS Telecom BVM 48 User Manual page 22

18
3. At the Notification Setting screen, check the Enable Notification box to turn "on" Notification 1.
Now, select the Send Email Notification button and click Next.
4. At the Email Notification screen, you'll enter your email server settings. Enter the IP address or
Host Name of your email server. Enter the Port Number (usually 25) and the "To" Email Address of
the technician that will receive these emails. Click Next.
5. At the Schedule screen, you'll select the exact days and times you want to receive email
notifications. You can set 2 schedules per notification. For example, you may want to receive
notifications at certain times during the week, and at different hours on the weekend. Use the check
boxes to select the days of the week, and select the time from the drop down menus. Click Finish. To
try a test notification, click the Test button (See next step.)
6. If you choose to test the email notification you've just setup, you will see a popup. Click OK to send a
test email alarm notification. Confirm all your settings by checking your email to see if you've received
Fig. 10.3
Fig. 10.4
Fig. 10.5