Table of Contents
Advertisement
14
6
TTY Interface
Fig. 6.1 The TTY interface initial configuration screen
The TTY interface is the NetGuardian's built-in interface for basic configuration. You can configure unit's
Ethernet port settings, view debug, and monitor alarms. For more advanced configuration tools, please use the
Web Browser Interface.
Some initial software configuration must be performed before you can use a remote connection to the
NetGuardian LT G2. For Telnet, connect to the IP address at port 2002 to access the configuration menus after
initial LAN/WAN setup. The same TTY interface is available through the front craft port. Telnet sessions are
established at port 2002, not the standard Telnet port as an added security measure.
NOTE: The default TTY username is "admin" and the password is "dpstelecom".
Menu Shortcut Keys
The letters before or enclosed in parentheses () are menu shortcut keys. Press the shortcut key to access that
option. Pressing the ESC key will always bring you back to the previous level. Entries are not case sensitive.
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian LT G2 and is the answer not in the manual?
Questions and answers