DPS Telecom NetGuardian 16 G2 User Manual page 41

35
5. At the Schedule screen, you'll select the exact days/times you want to receive notifications. You can set 2
schedules per notification. For example, you may want to send after hours or at certain times during the week, and
at different hours on the weekend. Use the check boxes to select the days of the week, and select the time from the
drop down menus. Click Save and Finish. To try a test notification, click the Test button (See next step.)
6. If you chose to test the notification, you will see the popup below. Click OK to test a voice notification. NOTE:
This test only means that your notification settings are correct, but you still need to assign the notification to an
alarm point.
7. Now you will associate this notification to an alarm
{system, base, analog, etc.) You have 8 notification
devices available to use. In the image below, you might
assign Notification Device 1 to Alarm 1. This means
that you would receive an email notification when an alarm
for SERVER ROOM occurs. Remember that Notification
#1 in the Notifications menu is the same as N1 on the
alarms page.