Cvbs / S-Vid Input Module; Dummy Input Module - Barco XLM H25 Owner's Manual

3. Connections
Order info:
Article No.
R9850950
R9851710
3.3.8

CVBS / S-VID input module

Technical info:
• Video (BNC)
- CVBS : 1Vpp ±3dB (0,7V Video +0,3V Sync) 75 Ohm termination.
- BNC loop through connector.
• S-Video (4 pins DIN)
- Y : 1Vpp ±3dB (0,7V Video +0,3V Sync) 75 Ohm termination.
- U/V : 0,7Vpp ±3dB 100% color base, 75 Ohm termination.
- Chroma : Multi-Standard (PAL / SECAM / NTSC).
- 4 pins DIN loop through connector.
• Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection.
• When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges
the module.
IN
Image 3-15
Order info:
Article No.
R9850920
3.3.9

Dummy input module

Technical info
• Dimensions : 103 x 181 x 41(W x D x H)
Image 3-17
Order info:
Article No.
R9850930
30
OUT
IN
D320 CVBS/S-VID
D320 DUMMY
Description
D325Digitizer RGB analog SXGA input module
D325Digitizer RGB analog UXGA input module
OUT
Image 3-16
Description
D325Digitizer CVBS / S-VID input module
Image 3-18
Description
D325Digitizer dummy input module
R5976690 XLM H25 03/09/2004