Delete Layout; Add A Window To A Layout; Remove A Window In A Layout - Barco XLM H25 Owner's Manual

6.6.4

Delete layout

What can be done?
A window layout saved in a file can be deleted from the file system.
How to delete
1. Push the cursor key ↑ or ↓ to highlight Delete. (menu 6-59)
The Delete selection menu will be displayed. (menu 6-60)
2. Push the cursor key ↑ or ↓ to select the layout file you want to delete.
3. Press ENTER to confirm.
A delete confirmation message will be displayed.
4. Press ENTER to confirm.
Press EXIT to cancel the delete action.
LAYOUT ADJUSTMENT
LOAD
RENAME
DELETE
ADD WINDOW
REMOVE WINDOW
EDIT WINDOW
KEYSTONE
BLANKING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-59
6.6.5

Add a window to a layout

What can be done ?
A window can be added to the actual layout as long as the maximum number of windows (4) is not yet reached.
How to add a window
1. Push the cursor key ↑ or ↓ to highlight Add Window. (menu 6-61)
2. Press ENTER to select.
A dialog box appears on the screen. (menu 6-62)
3. Enter the source number of the source you want to add with the digit keys of the RCU.
The new window will be added in the same position as it was previously removed. To change the position, go to Edit window or
select Window adjustment, Position.
4. Press EXIT to return to the Layout adjustment menu.
A Confirm Save layout menu will be displayed. When the active layout is read only, new name for layout will be proposed.
(menu 6-63)
5. Press ENTER to confirm.
LAYOUT ADJUSTMENT
LOAD
RENAME
DELETE
ADD WINDOW
REMOVE WINDOW
EDIT WINDOW
KEYSTONE
BLANKING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-61
6.6.6

Remove a window in a layout

What can be done ?
One typical window in a layout can be removed out of this layout.
R5976690 XLM H25 03/09/2004
DELETE LAYOUT
Filename
input1
input12
input123
input1234
-------------------------
Active layout : input123
Select with ↑ or ↓
Press <ENTER> to confirm
<EXIT> to return
Menu 6-60
Add Window
Select Window to Add <1 - 4>
<EXIT> to exit
Menu 6-62
CONFIRM
SAVE LAYOUT
Save changes to
Input 2 [2]
?
Select with ← or →
Reprogram with ↑ or ↓
or numeric keys
<ENTER> to confirm
<EXIT> to cancel
Menu 6-63
6. Adjustment Mode
73