Barco XLM H25 Owner's Manual page 57

How to find the correct values for the item in the Edit file menu?
Horizontal Total Pixels
Active Pixels
Horizontal Start
Horizontal Period
Vertical Total Lines
Vertical Active Lines
Vertical Start
Hor. line
Hor. Start
Frame
Vert. Start
Image 6-1
Input settings
How to install the correct settings for the options in the Edit file menu.
EDIT FILE OPTIONS
Source number
Film Mode Detection
Banner Protect
Select with ↑ or ↓
<ENTER> to toggle
←, →, ↑ or ↓ to change value
<EXIT> to return
Menu 6-11
R5976690 XLM H25 03/09/2004
If the value for "Horizontal Total Pixels" is wrong, sampling mistakes (small vertical bars in the
projected image) will be seen in the image.
Select "Total" and adjust the pixel quantity. Adjust for zero bars.
hint: if the number of bars increase, adjust in the other direction.
The "Active Pixels" : determine the width of the window on the screen. This value is normally given in
the source specifications. If not, adjust until full image is displayed (no missing pixels).
number of pixels between the start of the sync signal and the start of the video information.
already filled in with the correct value when active file.
already filled when an active file is selected to be edited
number of horizontal lines determining the height of the projected image. This value is normally given
in the specification of the source. If not, adjust until full image height is displayed (no missing lines)
number of lines between the start of the sync pulse and the start of the video signal.
Active pixels
Hor. Total pixels
Active lines
Vert. Total lines
1
[on]
[on]
Hor. Pulse width
Vert. Pulse width
6. Adjustment Mode
53