Communication; Baud Rate Setting - Barco XLM H25 Owner's Manual
Hide thumbs
Also See for XLM H25:
- Supplementary manual (2 pages) ,
- Specfications (4 pages) ,
- Owner's manual (133 pages)
Table of Contents
Advertisement
8. Service
Or,
enter the digits directly with the numeric keys.
SERVICE
IDENTIFICATION
PASSWORD
CHANGE PROJECTOR ADDRESS
COMMUNICATION
LAMP
DIMMING
CONVERGENCE
DIAGNOSIS
CLO
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-10
How to change the common address ?
1. Push the cursor key ↑ or ↓ to highlight Change projector address. (menu 8-12)
2. Press ENTER to select.
The Change Projector Address menu will be displayed and the actual address will be filled out. (menu 8-13)
3. Push the cursor key ↑ or ↓ to highlight Common address.
4. Press ENTER to select.
The digit will be highlighted.
5. Reprogram with ↑,↓,←,→ until the desired value is reached.
Or,
enter the digits directly with the numeric keys.
SERVICE
IDENTIFICATION
PASSWORD
CHANGE PROJECTOR ADDRESS
COMMUNICATION
LAMP
DIMMING
CONVERGENCE
DIAGNOSIS
CLO
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-12
8.5 Communication
Overview
•
Baud rate Setting
•
Serial Interface setting
•
RS422 Termination
•
Network Configuration
8.5.1
Baud rate Setting
How to setup
1. Push the cursor key ↑ or ↓ to highlight Communication. (menu 8-14)
2. Press ENTER to select.
The communication menu will be displayed. (menu 8-15)
3. Push the cursor key ↑ or ↓ to highlight Baudrate.
84
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS 0
Select with ↑ or ↓
Reprogram with ←,→
<ENTER> to confirm
<EXIT> to return
Menu 8-11
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS 0
Select with ↑ or ↓
Reprogram with ←,→
<ENTER> to confirm
<EXIT> to return
Menu 8-13
R5976690 XLM H25 03/09/2004
Advertisement
Table of Contents
