Switching Off; Using The Rcu - Barco XLM H25 Owner's Manual

4.6 Switching off

How to switch off the projector?
1. Press first Standby.
2. Let cool down the projector until the fans stop blowing, at least 15 min.
3. Switch off the projector with the power switch.

4.7 Using the RCU

Pointing to a reflective screen.
1. Point the front of the RCU to the reflective screen surface. (image 4-3)
Remote Control (A)
Image 4-3
Pointing RCU to the screen
When using the remote control, make sure you are within the effective operating distance.
The operating distance may be up to 15 m (50ft).
The remote control unit will not function properly if strong light strikes the sensor window or if there are
obstacles between the remote control and the IR sensor.
Directly to one of the IR sensors
1. When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line)
(image 4-4)
The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the
remote control unit and the projector IR sensor.
R5976690 XLM H25 03/09/2004
IR sensor (C)
Screen (B)
4. Getting Started
41