Dvi Input Module; Sdi Input Module - Barco XLM H25 Owner's Manual
Hide thumbs
Also See for XLM H25:
- Supplementary manual (2 pages) ,
- Specfications (4 pages) ,
- Owner's manual (133 pages)
Table of Contents
Advertisement
How to insert an input module ?
1. Gently slide in the input module into a free input slot with the grip handle at the top.
2. Locking in the module by pushing the input module completely into the slot until a definite click is audible.
3.3.3
DVI input module
Technical info:
•
Computer generated graphical source.
•
DVI data in.
•
162 MHz pixel clock.
•
Resolution from VGA to UXGA/60 Hz.
•
DVI compliant.
•
DVI loop through.
•
Amber LED (upper LED on the front side) will be lit indicating module start up.
•
When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges
the module.
IN
Image 3-5
Order info:
Article No.
R9850960
3.3.4
SDI input module
Technical info:
•
SDI data in.
•
SDI loop through.
•
270Mbit/s transmission (SMPTE 259M-C).
•
525/625 interlaced.
•
Coax (75 Ohm).
•
Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection.
•
When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges
the module.
Image 3-7
R5976690 XLM H25 03/09/2004
OUT
D320 DVI
Description
D325Digitizer DVI input module
IN
OUT
D320 SDI
Image 3-6
Image 3-8
3. Connections
27
Advertisement
Table of Contents
