Using The Rugged Remote Control; Projector Address; Address Setting - Barco XLM H25 Owner's Manual

4. Getting Started
45° 45°
Image 4-4
Remote control to IR sensors
Hardwired remote control
The RCU can be connected via a cable with the projector. For more explanation, see "Hardwired remote to CTRL 1", page 32.

4.8 Using the Rugged remote control

Overview
The rugged remote control can be connected to the projector. For more explanation about the setup, see "Bi-directional communi-
cation port, CTRL 3", page 33.
Once set up, the rugged remote control can be used in the same way as the RCU. As this remote control has a limited number of
buttons, some functions are hidden in a the menu structure (e.g. picture controls)

4.9 Projector address

Overview
•

Address setting

Displaying and Programming addresses into the RCU
•
• Displaying and Programming addresses into the rugged remote control
4.9.1 Address setting
Projector address
Address installed in the projector to be individually controlled.
Common address
Default address. Projector will always execute the command coming from a RCU programmed with that common
address.
42 R5976690 XLM H25 03/09/2004