Configuration; Lens Adjustment - Barco XLM H25 Owner's Manual

7. Installation
Source
S-Video
RGB analog
Component Video
DVI
SDI
HD-SDI

7.3 Configuration

What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1. Push the cursor key ↑ or ↓ to highlight Configuration. (menu 7-4)
2. Press ENTER to select.
The configuration menu will be displayed. (menu 7-5)
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
SCENERGIX
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-4
For more information, see Installation Guidelines .

7.4 Lens adjustment

What can be done ?
All lens adjustments are motorized and can be adjusted with the RCU.
The following items can be adjusted:
• zoom/focus
• shift
How to start up.
1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 7-6)
78
Indication
d320 cvbs/S-vid [s-vid]
d320 an uxga
d320 yuv/rgsb [rgsb]
d320 yuv/rgsb [yuv]
d320 dvi
d320 sdi
d320 hdsdi
CONFIGURATION
FRONT/TABLE
FRONT/CEILING
REAR/TABLE
REAR/CEILING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-5
R5976690 XLM H25 03/09/2004