Icp Expert Ii Software - Agilent Technologies 700 Series User Manual

Installation

ICP Expert II Software

The Agilent-trained, Agilent-qualified or Agilent-authorized field
service engineer will install the ICP Expert II software for you during
the installation process. However, you may need to install the
software yourself at some later stage, for example if you change the
PC. Instructions are provided.
There are several installation scenarios:




Installation includes:






For instructions on how to install your ICP Expert II software,
refer to the documentation provided with your software:



26
Standalone Flat File for Microsoft Windows 7 or Windows XP
Standalone Database for Microsoft Windows 7
Network Database for Microsoft Windows 7
Upgrading Standalone or Network Database ICP Expert II
installations for Microsoft Windows 7 or Windows XP
Installing the ICP Expert II software
Installing the ICP Expert II Help
Installing the PCI-GPIB communications card
Installing and configuring VSDA (if using the database file format
and saving data over a network)
Installing and configuring SCM (for 21 CFR Part 11 compliance)
Complete the dark current scan, wavelength calibration and
torch scan
ICP Expert II Windows 7 64-bit (SP1) Software Installation
Instructions
ICP Expert II Windows XP 32-bit (SP3) Software Installation
Instructions
ICP Expert II Software Installation Instructions for 21 CFR Part
11 Environments for Windows 7 64-bit (SP1) only
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide