The Agilent 700 Series ICP-OES must be installed by an Agilent-
trained, Agilent-qualified or Agilent-authorized field service engineer.
You should have completed and returned the form in the Site
Preparation Guide stating that you have prepared the laboratory in
accordance with the requirements detailed in that manual. An
Agilent representative will then arrange a suitable installation date
with you.
Details for unpacking the instrument and what to do in case it has
been damaged in transit are also outlined in the Site Preparation
Guide.
Personal Computer Requirements
The recommended PC specifications are listed in the Agilent 700
Series ICP Optical Emission Spectrometers Site Preparation Guide.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide
3. Installation
Personal Computer Requirements
ICP Expert II Software
PCI-GPIB Communications Card
Performing a Dark Current Scan, Wavelength
Calibration and Torch Scan
Hardware
Installation
25
26
27
31
32
25