Preparing For Analysis - Agilent Technologies 700 Series User Manual

Operation
5
You can check if the Peltier is on by looking at the Instrument Setup window
NOTE
Status page. It may take some time to reach operating temperature. It is
recommended that you wait three to five minutes before starting an analysis.
6
7
Hot Surfaces and Noxious Fumes
WARNING
Burn danger, inhalation hazard. The plasma emits heat, ozone and fumes
which can be hazardous. Always switch on the exhaust system before
lighting the plasma.

Preparing for Analysis

For detailed information on how to prepare your instrument for
analysis which includes setting up the peristaltic pump tubing and
turning on the plasma, see the ICP Expert II Help:
1
2
36
The Peltier will switch on automatically. If for some reason it has
been turned off, switch on the Peltier by choosing Peltier on
from the Analyze menu.
If you have accessories fitted, switch them on.
Switch on the laboratory exhaust system.
Click Start > All Programs > ICP Expert II > Help.
Expand How to and then click Prepare the instrument for use.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide