Color Coding; Ce Compliance - Agilent Technologies 700 Series User Manual

Safety Practices and Hazards

Color Coding

The various indicator lights appearing on Agilent instruments and
associated accessories are color coded to represent the status of the
instrument or accessory.





CE Compliance

Your Agilent 700 Series ICP-OES instrument has been designed to
comply with the requirements of the Electromagnetic Compatibility
(EMC) Directive and the Low Voltage (electrical safety) Directive
(commonly referred to as the LVD) of the European Union. Agilent
has confirmed that each product complies with the relevant
Directives by testing a prototype against the prescribed EN
(European Norm) standards.
Proof that a product complies with these directives is indicated by:


14
A green light indicates the instrument is in normal/standby
mode.
An orange light indicates that a potential hazard is present.
A blue light indicates that operator intervention is required.
A red light warns of danger or an emergency.
the CE Marking appearing on the rear of the product, and
the documentation package that accompanies the product
containing a copy of the Declaration of Conformity. The
Declaration of Conformity is the legal declaration by Agilent that
the product complies with the directives listed above, and shows
the EN standards to which the product was tested to
demonstrate compliance.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide