Axial Induction Coil - Agilent Technologies 700 Series User Manual

Maintenance and Troubleshooting

Axial Induction Coil

1
2
3
Figure 10. Induction coil — axial where 1. Torch, 2. Induction coil and 3. Torch
clamp
Pitch of Axial Induction Coil
Figure 11. Pitch measurement — an axial induction coil must have a pitch (↔)
of 7.5 ±0.5 mm
Pitch is measured from the center of one coil to the next, as shown above by the
NOTE
arrows between the dotted gray lines, and not the gap between adjacent coils.
48 Agilent 700 Series ICP Optical Emission Spectrometers User's Guide