Environmental Conditions; Temperature Control; Electrical Power Supplies; Fuses - Agilent Technologies 700 Series User Manual

Environmental Conditions

The instrument is suitable for indoor use only and is classified
suitable under the following categories (EN 61010-1):




Temperature Control

For optimum analytical performance, it is recommended that the
ambient temperature of the laboratory be between 20 and 25 °C (68
and 77 °F).and be held constant to within
the entire working day.

Electrical Power Supplies

For electrical requirements, refer to your Agilent 700 Series ICP
Optical Emission Spectrometers Site Preparation Guide.

Fuses

1FS1 and 1FS2
1CB1
For safety reasons, any other internal fuse or circuit breaker is not operator
NOTE
accessible, and should only be replaced by Agilent-authorized personnel.
Fuse information on the rear of the instrument is the most up to
date.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide
Installation category II
Pollution degree 2
Equipment class I
T6.3 AH 250 V, IEC 127 sheet 5, 5 x 20 mm
Circuit breaker 30 A Fast trip
Introduction
2 °C ( 3.6 °F) throughout
± ±
19