Daikin Sky Air Advance RZA200D7Y1B Service Manual page 189

st
Mode 1 code
14(24) 2
4
8
9
15(25) 5
1b(2b) 14
RZA200+250D7Y1B
Sky Air Advance-series
ESIE19-13A – 2020.05
Description function
The largest time interval for Dust
Collection Sign Display for "self
cleaning decoration panel"
Display or non‑display of green
lamp on the selfcleaning
decoration panel
Auto control operation for Filter
Auto Cleaning
Filter cleaning time for
"selfcleaning decoration panel"
Individual setting of ventilation
(6)
Wind block enable / disable
setting
1 Settings are made simultaneously for the entire group, however, if you select
the Mode No. inside parentheses, you can also set by each individual unit.
Setting changes however CANNOT be checked except in the individual mode
for those in parentheses. (Even if the settings are made for the entire group,
the display always indicates "01".)
2 "88" may be displayed to indicate the remote controller is resetting when
returning to the normal mode.
3 This function does not work when "SET BACK Function" is set by remote
controller.
4 This is the case when the remote sensor (optional kit) is used.
5 This is the case when the sensor option (optional kit) is used.
6 Wind block: one of 4 flaps can be set a block position (block position = closed
position).
Wind CANNOT be blocked 100% but mostly blocked without additional parts.
nd
2 code Description selection
01 About 1250 hr (dusty place)
02 About 2500 hr
03 About 5000 hr (less dusty place)
01 Display both:
▪ Airconditioning operation
▪ Filter auto cleaning
02 Non display:
▪ Airconditioning operation
Display:
▪ Filter auto cleaning
03 Display:
▪ Airconditioning operation
Non display:
▪ Filter auto cleaning
01 Auto control operation
02 Not auto control operation
01 Normal place in terms of dust
(normal office)
02 In case of dusty place
01 Normal
02 Individual operation
01 Enable
05 Disable
6 Technical data
|
Service manual
189