Daikin Sky Air Advance RZA200D7Y1B Service Manual page 109

To remove the DC fan motor assembly
RZA200+250D7Y1B
Sky Air Advance-series
ESIE19-13A – 2020.05
a Nut
b Propeller fan blade assembly
3 Pull and remove the propeller fan blade assembly from the DC fan motor
assembly.
INFORMATION
Use a pulley remover if the propeller cannot be removed manually.
4 To install the propeller fan blade assembly, see
4
procedures" [ 108].
1 Remove the propeller fan blade assembly from the DC fan motor assembly,
see "3.11.2 Repair procedures" [
f
b
b
b
a Connector X1A
b Tie strap
c DC fan motor harness
d Harness retainer
e Opening in partition plate
f Screw
g DC fan motor assy
2 Disconnect the DC fan motor connector X1A.
3 Cut the tie straps that fix the DC fan motor harness.
4 Slightly bend the harness retainers to detach the DC fan motor harness.
5 Guide the DC fan motor harness though the opening in the partition plate.
6 Remove the 4 screws that fix the DC fan motor assembly.
a b
4
108].
g
f
c d d
3 Components
|
"3.11.2 Repair
a
e
Service manual
109