Daikin Sky Air Advance RZA200D7Y1B Service Manual page 181

Via the wireless controller BRC7
RZA200+250D7Y1B
Sky Air Advance-series
ESIE19-13A – 2020.05
#
3 Press.
4 In case of multiple settings, repeat
previous steps to change the
settings
5 Press twice.
INFORMATION
▪
The connection of optional accessories to the indoor unit might cause changes to
some field settings. For more information, see the installation manual of the
optional accessory.
▪
For details about the specific field settings of each type of indoor unit, see the
installation manual of the indoor units.
▪
Field settings that are not available for a connected indoor unit are not displayed.
▪
Field setting default values are different depending on the indoor unit model. For
more information, see the service manual of the indoor units.
To set the field settings, you have to change:
▪ Mode No.
▪ First Code No.
▪ Second Code No.
a
b
c
d
e
a Mode No.
b Field setting mode
c RESERVE button
d First Code No.
e Second Code No.
f UP button
g DOWN button
h MODE button
i INSPECTION/TEST button
1 Press the INSPECTION/TEST button for at least 4 seconds during normal mode.
Result: Field setting mode is entered.
2 Press the MODE button to select the desired Mode No.
Action
Setting details are determined and
Field Settings screen is displayed.
▪
▪
f
g
h
i
6 Technical data
|
Result
Backlight is lit.
Once initialization is done, the
basic screen is displayed.
Service manual
181