Daikin Sky Air Advance RZA200D7Y1B Service Manual page 110

3 | Components
To install the DC fan motor assembly
To install the propeller fan blade assembly
Service manual
110
7 Remove the DC fan motor assembly from the unit.
8 To install the DC fan motor assembly, see
1 Install the DC fan motor assembly in the correct location.
2 Fix the DC fan motor assembly to the unit by tightening the screws.
f
b
b
b
a Connector X1A
b Tie strap
c DC fan motor harness
d Harness retainer
e Opening in partition plate
f Screw
g DC fan motor assy
3 Route the DC fan motor harness through the opening in the partition plate.
4 Route the DC fan motor harness through the harness retainers and bend the
harness retainers to attach the DC fan motor harness.
5 Install new tie straps to fix the DC fan motor harness.
CAUTION
Tie up the excessive DC fan motor harness using the tie straps to avoid the harness
from being cut by the propeller fan blade.
6 Connect the DC fan motor connector to the connector X1A.
7 Install the propeller
4
procedures" [ 108].
1 Install the propeller fan blade assembly on the DC fan motor assembly.
CAUTION
Do NOT install a damaged propeller fan blade assembly.
2 Install and tighten the nut to fix the propeller fan blade assembly.
"3.11.2 Repair
g
f
c d d
fan blade assembly,
4
procedures" [ 108].
a
e
see "3.11.2 Repair
RZA200+250D7Y1B
Sky Air Advance-series
ESIE19-13A – 2020.05