To Install The Switch Box - Daikin Sky Air Advance RZA200D7Y1B Service Manual

3 | Components

3.12.6 To install the switch box

Service manual
116
c
a Screw
b Switch box supporting plate
c Switch box
12 Lift and remove (unhook from the switch box) the switch box supporting plate
from the outdoor unit.
13 Slightly tilt the heat sink forward (±10°) to create space for the switch box
removal.
14 Lift and remove (unhook from the support plate on the right hand side) the
switch box from the outdoor unit.
CAUTION
Take care that the thermal interface grease (applied on the heat sink) does NOT
smear everything.
15 To install the switch box, see
1 Use a piece of cloth to remove the old thermal interface grease and clean the
heat sink surface(s).
2 Apply new thermal interface grease on the heat sink surface on the switch
box.
INFORMATION
Use 10~11 g of thermal interface grease and spread evenly over the heat sink
surface. Avoid too much grease inside the screw holes.
b
4
"3.12 Plate work" [
a
a
111].
RZA200+250D7Y1B
Sky Air Advance-series
ESIE19-13A – 2020.05