Table of Contents
Advertisement
2.3
Safety during electrical installation
Observe the following points for the electrical installation. The electrical connection of the
charging station can only be performed by skilled electricians and can only be carried out at
zero current. Follow the installation and connection instructions. Observe the applicable
regional standards and regulations. Failure to follow safety instructions may result in
hazardous situations that could cause death or serious injury.
Safety at the work site
When working on roads, construction sites and in public areas, ensure safety in line with local
requirements and regulations.
To perform the work properly, you need to observe:
• Legal specifications
• On-site safety requirements
• Road traffic conditions
Note the following:
• Secure the working area in accordance with the "Guidelines for the safety of workstations
on roads" or similar regional regulations.
• Use appropriate cordoning equipment where necessary.
• Always wear a safety vest when working in the area of road traffic.
• Provide for adequate space in the working area. The working area should be at least 8
meters in diameter.
• Comply with the valid building regulations for parking spaces for electric cars including
charging stations.
Risk of electric shock
The charging station uses 400 V AC supply voltage. Touching live parts may cause electric
shock or death. In order to avoid hazards, charging stations may only be opened by trained
and instructed electricians.
Before opening the charging station, switch off all power supplies for the device. Secure the
charging station against restart.
The charging station is switched off via the load breaker switch. Activation is not possible in
the charging station. De-energize the supply line.
Pull the plug, not the mains cord.
Never touch the plug with wet hands.
Do not perform any installation, maintenance, or configuration work during a thunderstorm.
Do not connect the vehicle to or disconnect it from the charging station during a storm.
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Safety instructions
2.3 Safety during electrical installation
13
Advertisement
Table of Contents
