Table of Contents
Advertisement
Assembly/installation
4.3 Assembly procedure
Risk of accident
Risk of accident in limited space. Leave sufficient clearance to surrounding obstacles to
avoid collisions and crushing when setting up the charging station.
• Ensure that there is sufficient clearance to the surrounding obstacles when setting the
• Keep the working area free of objects to avoid the risk of tripping.
Preparing the assembly
1. Check the requirements.
2. Carefully open the packaging.
3. Provide a base for setting the charging station down.
4. Carefully remove the charging station from the package.
5. Inspect the charging station for damage. Complaints filed after installation will not be
accepted.
6. Inspect the package content:
– The charging station
– 1 circuit diagram
– 1 key
– The test protocol
– 2 stickers with quick reference guide for charging
You will also need consumables for the selected installation variant.
Risk of electric shock due to exposed electrical connections and components
Before starting the installation work, check that the supply cable has been disconnected
from the mains and secured against restart.
If damage or tampering is visible (e.g. on the enclosure, socket), do not operate the
charging station.
36
WARNING
load down.
DANGER
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Advertisement
Table of Contents
