Table of Contents
Advertisement
Symbol
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Meaning
Communication error (Mode 3)
Vehicle not connected
Vehicle connected
Connection OK
Cable lock error
Cable release fault
Charging inactive
Charging process – electric vehicle
requires power
Charging process – electric vehicle
requires no power
Power switch fault (switch off).
Power switch fault (switch on).
Solution
Disconnect the vehicle from the charging
station and reconnect the vehicle.
Check the vehicle.
Check the charging cable.
Check the charging station (plug and
cable).
Connect the charging cable to the vehicle
and to the charging station.
Status message when you are logged in.
(e.g. via smart phone, RFID card, etc.)
Select the charging point. Follow the
instructions on the display.
-
Disconnect the charging cable and recon-
nect it.
Check that the plug is not soiled (e.g. due
to snow or icing).
Check the locking mechanism (or control-
ler).
Carefully plug the charging cable into the
socket.
Disconnect the cable again.
Check the locking mechanism (or EVSE
controller).
-
-
Check if the battery is full.
Check whether the vehicle cannot be
charged because of the temperature (too
hot or too cold).
Check the cable and vehicle for faults.
Check whether the station is configured
for the power output (max. rated current
too low).
Change the power switch.
Check the circuit breaker (tripped for
safety reasons).
Change the power switch.
Check the circuit breaker (tripped for
safety reasons).
Malfunctions
7.3 FAQs
89
Advertisement
Table of Contents
