Table of Contents
Advertisement
Appendix
A.4 Options available for orders
A.4
Options available for orders
Option overview
These extensions can be optionally ordered for the SICHARGE CC AC22 .
Options and accessories
Building terminal box to
SICHARGE CC AC22
Mounting plate with anchors
Overvoltage protection
Integration of a backend
system
Configuration and communi-
cation test
Customer-specific color tone
Full foiling
Partial foiling
Last Gasp function
116
Description
Add-on module for the back of the SICHARGE CC AC22. Allows power
connection directly from the utility company. Includes load fuse, RCCB
and electricity meter. Can be used for up to two charging stations.
Stainless steel plate with foundation anchors for pouring into the
foundation (not included). This simplifies alignment and mounting.
Internal add-on module, arrester type 1 + type 2 according to EN
61643-1, spark gap technology with follow current limitation, defect
indication, trip signal via OCPP, protection level <=1.5 kV. Lightning
current surge (10/350):50 kA, energetic coordination according to DIN
EN 62305-4
If required, SICHARGE CC AC22 can be connected to any backend acc.
to OCPP 1.6 already at the factory. We also configure and test the
connection of previously unconnected backends for you.
Every SICHARGE CC AC22 is fully tested at the factory. Optionally,
customer-specific configurations including SIM card and communica-
tion tests to the backend can be performed for you.
Standard color is RAL 9006. A number of other colors are available on
request.
Customer-specific foiling of the four sides of the SICHARGE CC AC22 in
accordance with the foiling plan with UV-resistant foil in 4-color print-
ing, applied directly in the factory.
Same as full foiling, but only approx. 50% of the total area
Internal add-on module, allows you to unlock the charging cable and
an alarm to the backend in the event of power failure
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Advertisement
Table of Contents
