Table of Contents
Advertisement
User seal for plug-in connections of the charging point controller
The operator is obligated to attach a user seal to the two plug-in connections of the charging
point controller. The two plug-in connections are labeled in the graphic above "Description of
the charging controller" with the numbers ② and ⑤. The user seal can, for example, be in the
form of a security seal/adhesive seal.
The user seal of the plug-in connections of the charging point controller is a user
seal/operator seal.
Note
Security seal
When trying to remove the label, parts of the hologram and a VOID lettering remain.
Reuse or manipulation is thus excluded.
3.7
Covers for infeed and charging modules
Sealable covers protect the charging module and the infeed against tampering. The unit is
delivered without seals. The operator must seal the covers using seals. Only personnel
authorized by the operator may open the seals. Notify the operator immediately if you find
broken seals or damaged covers.
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
3.7 Covers for infeed and charging modules
Description
29
Advertisement
Table of Contents
