Table of Contents
Advertisement
Safety instructions
2.2 Safe installation and assembly
Electrical cables
There is a risk of electric shock due to exposed electrical connections and components.
Before starting the installation work, check that the supply cable has been disconnected from
the mains and secured against restart.
If damage or tampering is visible, do not commission the charging station.
Using a crane or lifting gear
Using a crane or other mechanical lifting gear may result in hazardous situations that could
cause death or severe injury.
Do not operate a crane or other mechanical lifting gear without appropriate training.
Do not leave elevated loads unattended. People must not stay underneath loads, or between
loads and obstacles.
Follow safety instructions of the crane or lifting gear.
Transport at the work site
After lifting and transporting the charging station, ensure that it is safely positioned at the
parking place. Secure the station against tilting or falling over.
Never set down a charging station without securing it.
Crushing hazard
The weight of the standard version is 75 kg. Depending on the options ordered, the weight
differs from the standard version. Lift the charging station with at least two persons and
suitable lifting equipment.
Lifting the station may result in hazards that could cause not only serious material damage
but also serious injury. Do not insert or hook fingers into eyelets, cable grommets, or
openings.
Ensure that persons maintain sufficient distance to avoid injury when setting the charging
station down.
12
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Advertisement
Table of Contents
