Honda GP200H Manual page 42

ENGINE DOES NOT STOP WHEN ENGINE STOP SWITCH IS TURNED OFF
Check the engine stop switch (page 7-9).
Normal
Check the wire harness connecting the engine
stop switch and the ignition coil for open or short
circuit.
Continuity
Check the ignition coil primary side (page 7-7).
Replace the ignition coil if abnormalities are found,
and recheck.
FRAME TROUBLESHOOTING
CLUTCH CAN NOT BE DISENGAGED
• Clutch cable misadjusted
– Adjust (page 3-6).
• V-belt misadjusted
– Adjust (page 3-8).
• Tension arm binding on tension arm shaft
– Clean and lubricate (page 15-11)
CLUTCH CAN NOT BE ENGAGED
• Clutch cable misadjusted
– Adjust (page 3-6).
• V-belt misadjusted
– Adjust (page 3-8).
• Tension arm binding on tension arm shaft
– Clean and lubricate (page 15-11).
Replace the engine stop switch (page 7-8).
Abnormal
Replace the engine wire harness.
No continuity
TROUBLESHOOTING
4-5