Lubrication; Engine Idle Speed Check/Adjustment - Honda GP200H Manual

LUBRICATION

Apply grease to the following parts:
RECOIL STARTER COVER BOSS/
RECOIL STARTER FRICTION SPRING
DISASSEMBLY/ASSEMBLY: (page 8-4)
ENGINE IDLE SPEED CHECK/
ADJUSTMENT
• Use a tachometer with graduations of 50 min
or smaller that will accurately indicate a 50 min
(rpm) change.
Warm up the engine.
Stop the engine and connect a tachometer according to
manufacturer's operating instruction.
Start the engine and check the idle speed.
IDLE SPEED:1,250 – 1,600 min
If the idle speed is out of the specification, turn the
throttle stop screw [1] to obtain the specified standard
idle speed.
CHANGE LEVER HOLDER/HANDLE COLUMN PIVOT
DISASSEMBLY/ASSEMBLY: (page 14-3)
TENSION ARM SHAFT
REMOVAL/INSTALLATION: (page 11-2)
(rpm)
-1
-1
(rpm)
-1
MAINTENANCE
CLUTCH LEVER PINS
· PIN (8 x 27 mm)
· PIN (6 x 24 mm)
DISASSEMBLY/ASSEMBLY:
(page 14-4)
[1]
3-11