Honda GP200H Manual page 110

THROTTLE LEVER ASSEMBLY
REMOVAL/INSTALLATION
Disconnect the throttle cable from the control plate
(page 10-2).
After installation, perform the "THROTTLE CABLE
CHECK/ADJUSTMENT" (page 3-13).
R. HANDLE GRIP
When reassembly, apply
ThreeBond ® 1530C or
equivalent to the inside.
BAND
When reassembly, position to
the specified range (page 2-7).
THROTTLE
CABLE
CONTROL PLATE
NUT (5 mm)
BAND
When reassembly, position to
the specified range (page 2-7).
HANDLE
THROTTLE LEVER ASSEMBLY
When reassembly, position to
the specified range (page 2-7).
SCREW (5 x 25 mm)
2.5 N·m (0.25 kgf·m, 1.8 lbf·ft)
HANDLE PIPE
BAND
When reassembly, position to
the specified range (page 2-7).
14-5