Honda GP200H Manual page 124

LEFT SIDE:
REAR SIDE:
RIGHT SIDE:
O-RING (43.5 x 2.6 mm)
DISTANCE COLLAR A
BEARING (6203)
COUNTERSHAFT
FINAL GEAR
FINAL SHAFT COLLAR
DRIVE SPROCKET
REVERSE IDLE GEAR
BEARING (6202)
FRONT SIDE:
INTERNAL CIRCLIP (52 mm)
OIL FILLER CAP
WHEEL/ROTOR/TRANSMISSION
WATER SEAL (25 x 52 x 9.5 mm)
REMOVAL:
Take care not to damage the
transmission case and wheel shaft.
O-RING
When reassembly, apply
transmission oil to the
whole surface.
BEARING (6205)
WHEEL SHAFT
REMOVAL:
Remove the water seal
and circlip and withdraw
the wheel shaft from the
left side.
DRAIN PLUG BOLT
DRAIN PLUG WASHER
TRANSMISSION CASE
WATER SEAL
(25 x 41 x 9.5 mm)
PLUG SEAL
(28 mm)
DRIVEN
SPROCKET
FINAL CHAIN
(RK502KF x 44LE)
BEARING (6005)
15-13