3.59
Engine oil: checking oil level and cor‐
recting if necessary
Caution
Risk of damage to catalytic converter if engine oil level is too
high!
♦ Drain engine oil until level meets specification.
Required conditions for all engines:
•
Engine oil temperature from 100 °C to 110 °C.
•
Allow engine to run at idling speed for approx. two minutes.
•
Wait approx. two minutes after switching off the engine to allow
the oil to drain back into the sump.
•
Vehicle must be level (horizontal).
Procedure:
– If necessary, close engine lid.
– Switch on ignition and activate MMI.
– Press function selector button
– Select »Car«.
– Press left control button and navigate through following menu
structure:
♦ Servicing & checks
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
♦ Oil level
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Read off and evaluate oil level on display.
– If necessary, correct oil level:
Oil level
At "max"
Just under "max"
Significantly under "max" Fill up engine oil to optimum level (close engine lid to refresh oil level display).
.
MENU
with respect to the correctness of information in this document. Copyright by AUDI AG.
Evaluation/measure
Drain engine oil until level meets optimum level.
Optimum oil level.
Audi R8 2015 ➤
Maintenance - Edition 03.2016
3. Maintenance
53