Dust And Pollen Filter: Renewing - Audi R8 2015 Maintenance Manual

3.64

Dust and pollen filter: renewing

Filter element with service flap in glove box
Filter element without service flap in glove box
3.64.1 Filter element with service flap in glove
box
The dust and pollen filter is located in the glove box.
Step 1 - removing filter element:
– Clean out glove box -3- and line with paper.
– Carefully release retainer -2- in direction of -arrow- and take
out service cover -1-.
– Carefully release retaining tab -1-, swing cover -3- towards
rear in direction of -arrow- and detach it.
– Pull filter element -4- out of aperture in direction of -arrow-.
Step 2 - installing filter element:
– Clean aperture with a vacuum cleaner before fitting new filter
element.
– Fit filter element correctly: direction of flow is indicated with
arrows on filter.
Continue installation in reverse sequence.
⇒ page 63
⇒ page 64
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi R8 2015 ➤
Maintenance - Edition 03.2016
3. Maintenance
63