Table of Contents
Advertisement
– Unscrew bolts -arrows- for connector rail.
– Release connectors for ignition coils -6-, -7-, -8-, -9- and -10-
and unplug all connectors from ignition coils at the same time.
– Place connector rail slightly to one side. Make sure that wiring
is not kinked or damaged.
– Position puller - T40039- on thick rib at top of ignition coils and
detach all ignition coils from spark plugs one after the other in
direction of -arrow-.
– Unscrew spark plugs using spark plug socket and extension -
VAS 3122B- .
Step 3 - installing spark plugs:
– Install new spark plugs using spark plug socket and extension
- VAS 3122B- and tighten to specified torque (table
⇒ page 55
).
– Fit all ignition coils loosely into spark plug apertures and align
with connectors of connector rail.
– Push ignition coils evenly onto spark plugs by hand (do not
attempt to knock in coils with any kind of tool).
– Align connector rail and plug all connectors simultaneously
onto ignition coils so that they engage.
– Install connector rail, screwing in securing bolts to specified
torque (see table of tightening torques for installation
⇒ page 55
).
Continue installation in reverse sequence. Note tightening tor‐
ques (see table of tightening torques for installation
3.62
Cooling system: checking anti-freeze
and coolant level, and correcting if nec‐
essary
WARNING
Coolant expansion tank under pressure - risk of injuries!
♦ Only open coolant expansion tank when engine is cold.
Maintenance - Edition 03.2016
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 55
).
Audi R8 2015 ➤
57
3. Maintenance
- Quick Links:
- Engine Oil: Draining
Hide quick links:
Advertisement
Table of Contents
