Audi R8 2015 Maintenance Manual page 16

Audi R8 2015 ➤
Maintenance - Edition 03.2016
Vehicle interior: checking that it is clean and cleaning if necessary
⇒ page 47
Vehicle interior: removing any objects other than those protecting
interior surfaces ⇒ page 48
Vehicle interior: removing protective covers for seats and carpet
⇒ page 47
Vehicle interior and exterior: checking for and documenting any
damage ⇒ page 48
Vehicle (from below): checking for damage
Vehicle key: removing from ignition lock
Vehicle key(s): checking operation and recording number of keys
given to customer ⇒ page 49
Vehicle key(s), wheel covers and owner's literature: checking
availability and recording number present
Vehicle doors: removing edge protection
Front lid arrester hook: lubricating
Cleaning and care: checking that required measures have been
carried out on time ⇒ page 70
Suspension struts on front and rear axle: removing locking ele‐
ments ⇒ page 33
Luggage compartment cover and sun blind: checking that they
are rolled up and rolling up if necessary
Glove box light, interior lighting and reading light: checking oper‐
ation ⇒ page 45
Haldex coupling: changing Haldex oil
Vehicles parked outdoors: locking
Vehicles parked outdoors: covering unprotected vehicles with
protective transport film and car cover (not for vehicles with con‐
trol number 5K0 on data sticker on windscreen)
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Interior mirror: calibrating compass
with respect to the correctness of information in this document. Copyright by AUDI AG.
Body: checking vehicle paintwork for damage and corrosion from
below and with front lid, rear lid and doors open
Front lid locks: lubricating
Luggage compartment: removing protective film and felt pieces
⇒ page 45
Luggage compartment lighting: checking operation
Instrument cluster: resetting driver information system
⇒ page 71
Instrument cluster: checking warning lamps
Fuel tank: adding fuel additive
Cooling system: checking anti-freeze and coolant level, and cor‐
recting if necessary ⇒ page 57
Air cleaner: renewing filter element and cleaning housing
⇒ page 60
Engine, gearbox, final drive and steering: checking for leaks and
damage ⇒ page 40
Engine oil: draining ⇒ page 50
Engine oil: renewing oil filter
10
3. Maintenance
⇒ page 40
⇒ page 49
⇒ page 49
⇒ page 67
⇒ page 41
⇒ page 50
⇒ page 71
⇒ page 68
⇒ page 68
⇒ page 71
⇒ page 68
⇒ page 41
⇒ page 48
⇒ page 65
⇒ page 51
⇒ page 45