Preparations; Vehicle: Raising - Audi R8 2015 Maintenance Manual

2

Preparations

Vehicle: raising

⇒ page 3
Engine cover panel: removing and installing
Noise insulation: removing and installing
Window regulators: activating automatic open/close function
⇒ page 6
Vehicle diagnostic tester: connecting
2.1 Vehicle: raising
Caution
Risk of damage to vehicle due to incorrect use of lifting plat‐
form.
♦ Do not exceed the permissible lifting capacity of the lifting
platform.
♦ The vehicle should be lifted only at the points shown in the
illustration.
♦ Position support plates so that they are aligned centrally
below the lifting points.
♦ Ensure sufficient clearance between low-mounted vehicle
components and the lifting platform.
Special tools and workshop equipment required
♦ Drive-on ramps - T 40081-
Procedure:
– If support arms of lifting platform cannot be positioned under
side members: Drive vehicle onto drive-on ramps - T 40081- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 4
⇒ page 4
⇒ page 6
Audi R8 2015 ➤
Maintenance - Edition 03.2016
3
2. Preparations