Audi R8 2015 Maintenance Manual page 17

Audi R8 2015 ➤
Maintenance - Edition 03.2016
Engine oil: filling up ⇒ page 52
Engine oil: checking oil level and correcting if necessary
⇒ page 53
Parking brake: releasing ⇒ page 29
Road test ⇒ page 68
Wheel bolts: tightening to specified torque ⇒ page 32
Tyre Pressure Loss Indicator: storing changed tyre pressures
⇒ page 31
Tyre repair kit: checking that set is complete, and checking and
recording expiry date ⇒ page 32
Manual gearbox/automatic gearbox: selecting 1st gear/park
⇒ page 71
Windscreen washer system: checking spray pattern and adjust‐
ing if necessary ⇒ page 42
Wiper blades: checking for damage ⇒ page 42
Headlights: checking for correct adjustment ⇒ page 43
Service interval display: resetting service ⇒ page 12
Service Schedule: affixing vehicle data sticker ⇒ page 46
Service Schedule: entering Delivery Inspection ⇒ page 46
Seat belts: checking that retaining rivets are fitted, and checking
locking action of automatic belt retractor ⇒ page 47
Horn: checking operation ⇒ page 45
Sun visors: checking that they are folded up and folding up if nec‐
essary ⇒ page 49
Stock vehicles: observing measures specified in Maintenance ta‐
ble for stock vehicles (see "Before handing vehicle over to cus‐
tomer") ⇒ page 69
Dust and pollen filter: renewing ⇒ page 63
Stock vehicle care management: deciding and recording date of
next check ⇒ page 70
Tank flap unit: checking seal for damage and correct seating, and
checking water drain for dirt ⇒ page 66
Transport mode: checking activation and activating if necessary
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
⇒ page 13
with respect to the correctness of information in this document. Copyright by AUDI AG.
Transport mode: deactivating ⇒ page 12
Protective transport film: renewing according to manufacturer's
instructions ⇒ page 67
Protective transport film and car cover: checking position and
correcting if necessary ⇒ page 67
Underbody: checking trim, wheel housing liners, side members
and pipes/wiring for damage, and checking that they are properly
secured ⇒ page 41
First-aid kit: checking and recording expiry date ⇒ page 48
Warning triangle: checking availability ⇒ page 48
Water drain for oil filler neck: checking for dirt ⇒ page 54
Accessories: installing ⇒ page 69
Spark plugs: renewing ⇒ page 54
11
3. Maintenance