OPC9000 series − Instruction manual v1.0
39
10.5 Removing and installing the Hilscher netJACK module
10.5.1
Removal
Fully pull the pull tab out using a tool such as a flat-nose
pliers.
Pull the module out approx. 5 mm.
Then, lift the module a bit to lift the metal brackets out of
the circuit board.
FYI: Section 10.5.3 shows how the metal brackets are
inserted into the circuit board.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany