Fyi: Fixing The Module To The Circuit Board - ADS-tec OPC9000 Series Instruction Manual

OPC9000 series − Instruction manual v1.0 41
10.5.3

FYI: Fixing the module to the circuit board

The module is clamped onto the circuit board with four
metal brackets.
The metal brackets must be inserted into the recesses in the circuit board:
... and finally, pushed onto the circuit board, where they will click into place with a slight pressure.
For the purposes of illustration, this image shows the back of the circuit board (usually not visible) with
the metal brackets fully inserted:
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany