Removing And Installing The Hilscher Netjack Module; Removal - ADS-tec OPD9016 Instruction Manual

OPC9000 series − Instruc�on manual v1.5 46

10.5 Removing and installing the Hilscher netJACK module

10.5.1

Removal

Fully pull the pull tab out using a tool such as a flat-nose
pliers.
Pull the module out approx. 5 mm.
Then, lift the module a bit to lift the metal brackets out of
the circuit board.
FYI: Section 10.5.3 shows how the metal brackets are
inserted into the circuit board.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nür�ngen • Germany