Treatment And Disposal Of Lithium Batteries - ADS-tec OPC9000 Series Instruction Manual

Hide thumbs Also See for OPC9000 Series:
Table of Contents

Advertisement

OPC9000 series − Instruction manual v1.0

2.8 Treatment and disposal of lithium batteries

This device contains a lithium battery for supplying the system clock with power as long as the supply
voltage is not connected. The battery has a life cycle of 3-5 years depending on which load is applied.
The battery type to be used is:
Lithium battery CR2032
ADS-TEC part number: DZ-SONS-04075-1
The used lithium battery should be disposed of in accordance with local legal regulations.
WARNING
Hazard due to explosion
Danger of explosion if using incorrect battery types.
 Use the battery type recommended by the manufacturer.
ATTENTION
Hazard due to thermal loads
The more the battery is exposed to higher temperatures, the faster it ages.
 Operate the device within its specifications.
ATTENTION
Damage to the battery
Incorrect handling of the battery can cause it to be damaged or destroyed.
 Lithium batteries should not be exposed to fire, soldered, recharged, opened, short-circuited,
reversed or heated above 100 °C and they should be disposed of properly as well as protected
against sunlight, humidity and condensation!
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Opc9016Opc9019Opc9024

Table of Contents