Endress+Hauser Fieldbus Levelflex M FMP41C Operating Instructions Manual page 52

Commissioning
ENDRESS + HAUSER
⇒
– +
E
52
Funktion "Distanz prüfen" (051)
This function triggers the mapping of interference echoes. To do so, the measured distance must be
compared with the actual distance to the product surface. The following options are available for
selection:
Selection:
• distance = ok
• dist. too small
• dist. too big
• dist. unknown
• manual
• probe free
Levelflex M FMP41C with FOUNDATION Fieldbus
distance too small distance = ok
+
+
L00-FMP4xxxx-14-00-06-de-010
Endress + Hauser