Scope Of Delivery; Certificates And Approvals; Registered Trademarks - Endress+Hauser Fieldbus Levelflex M FMP41C Operating Instructions Manual

Levelflex M FMP41C with FOUNDATION Fieldbus
"
!
Endress + Hauser
2.2

Scope of delivery

Caution!
It is essential to follow the instructions concerning the unpacking, transport and storage of
measuring instruments given in the chapter "Incoming acceptance, transport, storage" on → ä 12!
The scope of delivery consists of:
• Assembled instrument
• Endress+Hauser operating program (on the enclosed CD-ROM)
• Accessories (→ Chap. 8).
Accompanying documentation:
• Short manual (basic setup/troubleshooting): housed in the instrument
• Operating manual (this manual)
• Approval documentation: if this is not included in the operating manual.
Note!
The operating manual BA245F - "Description of Instrument functions" you can be found on the
enclosed CD-ROM.
2.3

Certificates and approvals

CE mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with the
statutory requirements of the EG directives. Endress+Hauser confirms the successful testing of the
device by affixing to it the CE mark.
2.4

Registered trademarks

® ®
KALREZ , VITON , TEFLON
Registered trademark of the company, E.I. Du Pont de Nemours & Co., Wilmington, USA
®
TRI-CLAMP
Registered trademark of the company, Ladish & Co., Inc., Kenosha, USA
®
ToF
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
®
PulseMaster
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
Foundation™ Fieldbus
Registered trademark of Fieldbus Foundation Austin, Texas, USA
®
Identification
11