Endress+Hauser Fieldbus Levelflex M FMP41C Operating Instructions Manual page 10

Identification
10
80
90
995
You can fill in the options of the respective feature into the following table. The filled in options
result in the complete order code.
FMP41C-
⇓
Please enter probe length in mm or inch / 0.1 inch
probe length LN → ä 14
1)
OVP = overvoltage protection
Levelflex M FMP41C with FOUNDATION Fieldbus
Cable Entry:
2 Gland M20 (EEx d > thread M20)
3 Thread G1/2
4 Thread NPT1/2
5 Plug M12
6 Plug 7/8"
9 Special version, to be specified
Additional options:
A Basic version
C EN10204-3.1 material, pressurized, (316/316L pressurized) inspection
certificate
H * 5-point, linearity protocol
K * 5-point, 3.1, pressurized, 5-point linearity protocol, see additional spec.,
EN10204-3.1material, perssurized (316/316L pressurized), inspection certificate
Y Special version, to be specified
Marking:
1 Tagging (TAG)
2 Bus address
Complete product designation
mm
inch / 0.1 inch
Endress + Hauser