Electrical Voltage - M&C PSS Series Instruction Manual

Qualified personnel in the sense of the safety instructions in this instruction manual or on the product
itself are persons who
as project personnel are familiar with the safety concepts of the gas treatment device, or
•
• as operating personnel are trained in the use of gas treatment devices and are familiar with the
contents of this manual relating to its operation, or
as maintenance and/or service personnel have been trained in the repair of such devices of
•
automation technology and who are authorised to operate, to earth and to designate circuits and
devices/systems in accordance with the standards of safety technology.
3.3

ELECTRICAL VOLTAGE

All work, including in particular work on live components, must be carried out in accordance with current
applicable safety guidelines. The gas treatment device must in this case be switched off externally!
Danger of electric shock! Disconnect the device from the mains power supply before starting work.
Secure the system against being switched on again unintentionally.
This also applies to all devices and equipment connected to this device.
www.mc-techgroup.com SS-M05_Marine | 1.01.00 7