Introduction; Serial Numbers; Power Supply - M&C PSS Series Instruction Manual

6

INTRODUCTION

The gas treatment device is used for gas preparation of continuous measurement of emissions in
Marine applications. The system consists of a stainless steel housing which accommodates the main
components such as cooler, peristaltic pump, bellow valve pump, flowmeter with sensor and
components for auto calibration of the analyzer.
6.1

SERIAL NUMBERS

The serial number plate is located on the right side of the stainless steel housing.
Note
6.2

POWER SUPPLY

The valid supply voltage connections can be found on the type plate.
www.mc-techgroup.com
Please refer to this serial number if you have any questions about
the device or if you need to order spare parts or consumables.
SS-M05_Marine | 1.01.00 11