1
INSTALLATION
TECHNICAL INFORMATION FOR
THE INSTALLER
In order to install the cooker top into the
kitchen fixture, a hole with the dimensions
shown in fig. 1.2 has to be made, bearing
in mind the following:
•
A 30 mm ventilation gap must be
provided between the bottom of the
appliance and any cabinetry, draw
unit or appliance.
•
If the cooktop is installed above
an oven, the two appliances shall
be connected to the gas and/or
electrical supply with independent
connections.
•
The cooker top must be kept no less
than 100 mm away from any side
wall (from side edge of cutout - fig.
1.1).
•
The hob must be installed at least 50
mm from the wall (from rear edge of cutout - fig. 1.2).
•
There must be a distance of at least 650 mm between the hob and any wall cupboard or
extractor hood positioned immediately above (see fig. 1.1).
8
Fig. 1.1
Fig. 1.2